Copper leaf guard for copper gutters (2 meter piece)

Variant flat or curved?

“Regardless of the covering of the roof tiles, the flat version of the leaf guard fits perfectly in the gutter.
Even if the cover should not be visible from below, we recommend the flat variant.

If there is enough space in the gutter without protruding tiles, we recommend the curved version.
Due to the special curvature of the grid, the rain drainage is optimized and even in heavy rain water is prevented from running over the gutter.

Our leaf guard is made of high quality perforated copper and comes in handy 2 meter pieces.

The attachment of the leaf guard is done with the help of clips on the front side of the gutter, while the back side is hooked by a fold.

Advantages:

By using high quality copper sheets, you have the advantage of extremely long durability of the leaf guard. It also makes the leaf guard non-flammable. The leaf guard effectively protects against the penetration of pieces of leaves. Due to the surface mounting, the flow of water in the gutter is not affected.
With our gutter guard, leaves are blown off the cover by the wind. Therefore, cleaning the gutter is only very rarely necessary. Due to the rigidity of the perforated sheet, cleaning is problem-free and you do not have to expect any deformations, as would happen, for example, with foliage protection made of wire. Besides the practical advantages, our metal leaf guard simply looks good and enhances your house!

Determination of the correct size:

The gutter size corresponds to the width of the sheet in mm before this is bent in the form of a gutter.
Simply measure the diameter of your gutter and determine the appropriate size using this chart:

(Note: 4-tlg to 10-tlg is a common size unit among plumbers, it does not mean that the leaf guard is delivered in 10 pieces. It is always 2 meter long pieces).

Leaf guard for half round gutters:

Diameter associated size
80 mm 200mm (10-pcs)
105 mm 250mm (8-piece)
127 mm 285mm (7 pcs)
153 mm 333mm (6 pcs)
192 mm 400mm (5-piece)
250 mm 500mm (4-piece)

Leaf guard for box-shaped gutters:

(For box-shaped gutters, please leave us a short message in the ordering process, because the clips are slightly different from those of semicircular gutters).

Diameter associated size
70 mm 200mm (10-pcs)
85 mm 250mm (8-piece)
100 mm 285mm (7 pcs)
120 mm 333mm (6 pcs)
150 mm 400mm (5-piece)
200 mm 500mm (4-piece)

Scope of delivery of the leaf guard:

• 2 meter piece copper leaf guard
• Per 2 meter piece 3 matching clips are included for attachment.

Installation of leaf guards on the gutter:

Simply screw or click the holders onto the gutter bead.

Mounting instructions leaf guard (PDF)

Assembly video:

Additional Information